Jig-Con Creation Basic Tutorial (Easy-Medium)

Discussion in 'Switch - Tutorials' started by Zonark, Jun 20, 2018.

  1. Zonark
    OP

    Zonark Zonark - Noun - A God

    Member
    4
    Jul 11, 2010
    United States
    This Tutorial will be a basic Jig-Con. It can be simplified to fit inside the actual joycon entirely. The basic use is to protect the actual Switch Rail from damage caused by a traditional Jig. Its fairly simple to do and easy for the most part. You just need basic soldering skills to preform.

    This will be a basic run down of how to create a Jig Con and what is needed.

    Items needed:
    1. Replacement Joy-Con rail and Shell.
    2. USB Cable or any thin wires
    3. Solder
    4. Soldering Iron
    5. Kapton Tape (Optional)
    6. Soldering Skills

    Step 1 Locate the Joy-con rail connections.
    IMG_2174 - Copy.
    Step 2 Pin lead outs are as follows. connect wires (from inside usb cable) to the pins on the back of the ribbon cable. the orientation is top left pin and bottom right pin from this perspective. (Pin 1 and 10 are being used to short).
    IMG_2175 - Copy. IMG_2176 - Copy.
    Step 3 solder wires to pins (protect other connections by using Kapton tape Optional).
    IMG_2177 - Copy.
    Step 4 Move wires out of way.
    IMG_2178 - Copy.
    Step 5 assemble.
    IMG_2179 - Copy.
    Now again this can be fit inside an actual working joycon. I would add a button to the bottom that could be pressed when wanting to short it out and use it as a jig


    Jig-Con Being used. Video below.
     
    leon315 and SonicRegret like this.
  2. kristiansja

    kristiansja GBAtemp Regular

    Member
    3
    Apr 30, 2016
    Norway
    and why would you do that and not just short the wire on your own, working joycon? Seems kinda pointless to me
     
    xstationbr likes this.
  3. Zonark
    OP

    Zonark Zonark - Noun - A God

    Member
    4
    Jul 11, 2010
    United States
    This can fit inside a working one this is a concept creation. Plus it gives use to damaged joy cons as well you can add a button to the bottom for use in working joy cons. Basically on the fly jig you don’t have to remove over and over plus protecting original rails
     
    Last edited by Zonark, Jun 21, 2018
    TLOZmaster likes this.
  4. slaphappygamer

    slaphappygamer GBAPerm

    Member
    7
    Nov 30, 2008
    United States
    Aptos, California
    I was just going to use the replacement rail and solder the pins short. The pins designed to be inserted in the switch would be less stressful for the switches pins, which appear to be dainty and fragile.
     
  5. xstationbr

    xstationbr Advanced Member

    Newcomer
    2
    Dec 30, 2015
    Brazil
    Muito obrigado, eu já tenho meu projeto em andamento, vou tentar colocar um tópico aqui no GBA para compartilhar meu projeto com todos, para que eles possam melhorar suas idéias também.
    Prometendo para quem não tinha ideia.
    Parabéns pela iniciativa.
     
  6. RHOPKINS13

    RHOPKINS13 Geek

    Member
    6
    Jan 31, 2009
    United States
    That cord you used is about 10 times the size you need, could have done the job with a little 1 inch jumper wire, or for fusee gelee just put a blob of solder between 9 and 10.
     
    Zonark likes this.
Loading...